Powerline's VHGF

Powerline released recently a second run of the third series VHGF grain hoppers. The following numbers are available.

PD-100A-222 GJF-222 VR

PD-101A-303 VHGY-303 VR

PD-102A-316 VHGY-316 VG

PD-103A-332 VHGF-332X VG

PD-106A-302 VHGF-302H VF

PD-107A-323 VHGF-323J VF-ABB

PD-108A-259 VHGF-259 VF-CUB

I added both the Australian Barley Board and the Malting Barley for Carlton & United livery units to my collection. Below; not being politically correct; here are the sides hidden from view in the shops because of their association with the alcohol industry.

The standard of these models is the same as the previous run. The printing is sharp and the orange band is correct, as it was not V/Line orange. The only problem is the quality of the wheels which area bit chunky.

The other problem, is that the metal walkways seem to have had some rough handling on assembly, with sections been pushed down. These can be straightened by carefully pushing from beneath with a thin flat object. I had a privilege to select my two units, obtaining two with minimal damage to the walkways.

The Caulfield Report 2014

Another year, and the ARMA Caulfield exhibition has been and gone. I am going to be different, and start with the news.
Firstly, Auscision confirmed that they are going to produce a 48 class. Why? when Powerline have a 48 and Trainorama are producing one. Well, the report was that, Powerline have produced only a couple of liveries, and will take years to go through the rest, and the Trainorama one: quote 'is not quite right'. Pressing the point about an 830, the reply from Pete was 'bloody South Australians' and it will need to be looked at to see if it is financially viable, as tooling changes cost up to $5000 for each modification. Announced on Facebook, that the 830 class is been produced.
Other than the 48 class, also expect the Victorian C class, G/BL/81 class: basically anything that Sothern Shorthaul Railroad has, will be produced; and a super detailed NR is on the go. (It was interesting to learn, that when Austrains produced the C class: their second model, it was a slow in sales. Auscision are hoping that the more modern liveries will be more sort after). Also the 442 class, plus series 2 and 3 X class.
As for wagons, the CIMC C-35 92 tonne grain hopper is past CAD stage, producing ATN/PN XGAY, AWB WGSY, SSR's new wagon, plus, new wagons for Freightliner, G&W and I think for QUBE.

Photo: Chris from WF

Plus, for Victorian modellers, the VHHF grain hopper is on the go.

PS The RMX container wagon is still in development, and should be due 2015.

I also had a lengthy discussion with SDS. To come on the intermodal side are the RQTY and RRTY wagons, based on the FQX but with the skeletal deck and 70ton ride control bogies. After the JCW/NQTW/RQJW will be the Victorian and South Australian versions. This is because, the only part in all these wagons that needs replacing is the deck.
Also, under consideration, from suggestion of yours truly, is the NQAY/RQAY NSW skeletal wagon, if it they can use components from the OCY.
Austrains released their Victorian C brake van, which I heard has problems. The doors are too wide and the underfloor detail is mirrored? They also had the recently released 81/BL/G locos.

SouthernRail Models had their V/locity rail cars on display, and look good. It has only one motor over the two or three car set, and uses a 21 pin DCC plug.

Bendigo Rail Models P class samples.

Another P class sample.

EDI GT46C-ACe Locomotive Painted samples.

SDS Models JCW, showing underneath.

SouthernRail's V/locity. Two of a three car set.

To the layouts.

Maryborough. The station building was shown a couple of years ago, now on a layout.

Melbourne tram: Victoria Road

NSW Waterfall.

N gauge Japanese.

Anthony's Room shunting layout for a small space.

More corner rebuild

For the past couple of weekends, I have been in the shed rebuilding the other corner (a drop in section),that is at the garage door. This is part of the re-organizing for the level change loops, yet to be built, but in the design stage.

I took apart the structure, keeping the top track intact. When the new base was built, the top track was repositioned. Even though I reused a lot of the original timbers, including the same length along the front, the top turned out to be about 10cm longer than the new base. So had to trim some off.

The bottom track curve run was then estimated using my rough compass. Yet, there was change to come, as it was decided to swap some of the lower track to the fixed wall frame work. things became interesting, as the levels had changed since it was built, and required correcting. With that work undertaken, the frame work, now lined up, it was just correcting the height of the top track, so it, also lined up.

Next, was to cut the track base for the lower level. Not as easy as done, as it has to provide for the curve, around and angular structure. A couple of miss hits, but we got there in the end, with more ply offcuts than would have really liked.
With the evening temperature dropping, it was time to stop. Still work to undertake, wire up and test.

QRNational/Aurizon rolling stock

Have been working on a few items of rolling stock for a QRNational consist. I started work on a set of CQWY well wagons quite a while ago, and decided it was time to head towards completing them. To start with, two BGM RKIY well wagon kits. These provide the base structure, but a CQWY has a slightly different shape on the sides, and different cross bars in the well. Download the data sheet from CFCLA. The drawing is a bit small, but gives the impression of what is needed.

http://www.cfcla.com.au/datasheet/CQWY_Wagon_Data_Sheet.pdf

Here is a new one outside the workshops at Islington.

Note the change of location of the CF logo.

This is what we started with.

This is what we ended up with.

The colour, as reproduced is actually much darker than the picture illustrates. (It is a real dark blue). I used Tamiya TS15, as recommended on the The paint guide for modellers of Australian Railways. The model was given a good coat of Steam Era Models etch grey undercoat, as all the whitish clear plastic needs to be covered. Probably a coat of white undercoat would have been better.  Still time to change colour, as there are no decals available for a CQWY. (Decided at this stage to keep the colour as is).

Nearly finished, just decals required? Also, soon will have a 6000 class up front.

 
(May a manufacturer pick up this wagon sometime, as there are a lot of them been hauled around by Aurizon a the moment).
The other wagon that I have had sitting around, is a QQAY. This is a Wuiske model. It started out as a BZEY, which comes without bogies, and is cheaper than their QQAY kit. The BZEY is the narrow gauge code for the wagon, before been converted to standard gauge.

This is a white metal kit, and I added the extra parts (the large air tank and code boards), and left off the steps. I used Auscision ride control bogies on this wagon. Still to be undercoated and painted light grey.

QQAY

The wagon, being 60' in length, means you can just load three 20' containers. Though, usually, photos show a 20' at each end or a 48' reefer in the middle.

QRNational PM service heading towards Mt Barker Junction.

QRNational MP service having come through the south line heading towards Port Adelaide.

Just about all my QQAY photos show a loading like this.

More Layout repairs.

The trouble with building a layout in a garage is that, unfortunately you have share the space with cars. At the moment, in the double space, there is only room for one car, as a table tennis table takes the remaining space. It also means that I have to removable sections.
One corner has a drop in section, the other corner has been hinged. It is this one that required to be repaired. At this time, I decided to rebuild the section, away from the L girder construction to a more traditional baseboard frame.

My first attempt was to use 5mm ply separated by 19mm blocks, to reduce weight, but this turned out to no rigid enough, and the tracks would not line up once the clamps were released that were holding the section in place while I was adding the upper level.
I returned to the 70x19mm pine lengths, but drilled holes to reduce the weight. This time, it all lined up, and actually provided a more stable base than it was before. I still have to change over the hinges to probably a piano hinge, for more strength.

The non track area at the end of the lower level is to be filled with some Fleishmann Profi track, as it is probably the strongest set track on the market, and should with stand the odd knock when the modules are all assembled and disassembled. (This has been a problem in the past, with even track soldered to circuit board, been ripped out on one occasion).
Next stage is to undertake some adjustments to the top level and place some MDF as a back screen on the lower level. From then on, it is to build a spiral crossover, as the two levels have to join, to provide the continuous run. This also has to be removable, and to be stored somewhere, when not in use.
The other corner section, also needs attention, as it is too heavy when been lifted in and out of position.

One week later, and I have installed the piano, or continuous hinge. Re-wired again and tested once more.

Railmotor/Trainworld SCT Locomotive

After years of talking about producing SCT Logistics GT46C-Ace, SCT locomotive, photos have finally been posted to prove that it is on the way.

Photo: Trainworld-Australian Facebook.

And complete engineering samples.

Photos: Trainworld-Australian Facebook.

Still a way to go. The etchs are still a bit course, the running board is not straight, the hand rail is a bit flimsy, and the bogie sideframes are a bit rough!

Adelaide exhibition 2014

It's that time of the year again, with the Adelaide model rail exhibition on. The big news for South Australian modellers was the release of Orient Express's M vans, with liveries from early dark grey to AN green. The dark grey vans also come with buffers (as all new Webb stock had buffers), and these will match perfectly if buffers are added to the original OB opens, as care has been taken to make sure the buffer beams are all the same height.
A few new layouts this year, plus some old ones. SARMA had their first outing of Strathburn, based on Strathalbyn (which was also represented in N gauge).

Bridgewater was back, more complete that last year. The only problem with this layout, is that the top cover construction is too low and us taller people have to bend to see to the back scene. (Also, my CFS son says that the CFS Dennis RS237 pumper at the road crossing needs to be re-assigned to the Mt Barker brigade, as it went to Morphett Vale in 2010. In fact it was imported in 2005).

Some of their weathered AHGX grain hoppers, with some interesting artwork on their sides.

Eskbank, a NSW HO scale layout set around 1899.

 

The station yard of Lower Downe, a OO scale UK based layout.

N gauge England, at Kirbyvale. I hope I have the right one, as there were two UK based N gauge layouts side by side.

And something different, Fort Apache; a US themed, old American 'wild west' N gauge layout. The only thing missing from the small township was the saloon!