|Shows one modified and one un-modified unit.|
It was then all clean up of the filler and paint the primer. I also used a half inch screw for the centre bogie (drilled straight through), as the shorter screw supplied would not bite the 3D print to hold.
|Unit in primer grey, awaiting final livery.|
Above, is a RQEY loaded with a 40' container, clearly showing the gap a the end of the deck, which if you built the kit as was, the 40' container sit on the whole deck with no gap.
More photos: unloaded from Malleeroute flickr site.
And another loaded shot from Wagonfreaks blog.